Harmonic Resonator

The Harmonic Resonator is an electronic device that generates specific resonant frequencies that are converted to mechanical vibrations. Each specific vibration is generated in a hand-held probe that is placed on the appropriate part of the body. Frequency selection is achieved by the use of push buttons on the control unit.

In addition to its use for vibrational healing, the Harmonic Resonator is convenient tool for researchers who want to study the beneficial effects of vibrational therapies.

The electronic control box is approximately 5.5 inches long, 3 inches wide, and a height of only 0.87 inches. The hand-held vibrator is approximately 4 inches long and has a diameter of about 1 inch, which makes it easy to hold and manipulate. The vibrator is connected to the control box by a thin, 80 inch cable. The unit is powered by a 9 volt (dc output), 300 mA power supply that plugs into a 110 volt source. (Users in countries that have 220 volt electricity must provide their own power supply with a 9-volt, 300mA to 500mA output, center post positive. The connecting 9-volt plug measures 5.5 mm OD, 2.1 mm ID, and 12 mm length.)

The Harmonic Resonator has vibrational settings for the following categories:

• Song of the Spine BoneToner resonant frequencies
• Spinal cord and fascia frequencies
• Brain wave frequencies
• Organ frequencies
• Chakra frequencies
• Solfeggio frequencies
• OM fundamental frequency and harmonics
• Schumann frequency

Operation of the Harmonic Resonator is simple and direct. The basic procedure is to select a category of harmonic frequencies, then tune to the specific frequency needed for a specific treatment. The vibrating probe is applied to the appropriate part of the body.

When the spinal category is chosen, the Harmonic Resonator automatically generates the appropriate frequency for each vertebra. The therapist selects the setting for a particular vertebra (C1, C2, etc.) on the Harmonic Resonator and then applies the hand-held probe to that vertebra. The setting must be changed when another vertebra is to be treated. For the most effective results, it is recommended that muscle testing be used to determine which vertebrae need to be treated.

The basic procedure is the same for all of the categories. First select the category, then select the frequency. The vibrations are started and stopped by pressing the select button. The move to the next frequency is accomplished automatically when the previous setting is stopped. To select a specific frequency, the user scrolls through the list using either the down or up button. To obtain the most beneficial results, it is recommended that muscle testing be used to determine what vibrational treatments are needed.

The BRAIN WAVE frequencies in the Harmonic Resonator are Delta, Theta, Alpha, Beta, and Gamma.

The ORGAN frequencies are Heart, Small Intestine, Lungs, Large Intestine, Liver, Gall Bladder, Stomach, Spleen, Kidneys, Urinary Bladder, Pancreas, and Adrenals.

CHAKRA frequencies are labeled Crown, 3rd Eye, Throat, Heart, Solar Plexus, Sacral, and Root.

The SOLFEGGIO frequencies are labeled Liberation, Change, Transformation, Relationships, Expression, and Spiritual.

OM frequencies are Low OM, Mid OM, and High OM.

The EARTH RESONANT category simulates the Schumann resonance, a low-frequency, electromagnetic frequency generated by lightning and which surrounds and penetrates the entire earth. Researchers have found that brain waves are attuned to the Schumann resonance.